alpha home - starter packs

Starter pack radiator

The radiator starter pack contains the basic components required to control an alpha home system with three radiators. A combination with underfloor heating is possible.

The basic equipment consists of:
1 x Control box
1 x Gateway
3 x Radiator drives

Starter pack underfloor heating

The underfloor heating starter pack contains the basic components required to control an alpha home system with three rooms/zones over underfloor heating. A combination with radiators is possible.

The basic equipment consists of:
1 x Control box
1 x Gateway
1 x Underfloor heating control system
3 x Room sensors


alpha home - radio components

Control Box

The control box is the central control unit of the system. Just like the heat pump control, the control box is also integrated in the home network and thus allows for intelligent communication. It is integrated in the network via cable or optionally via WLAN with the WLAN stick.

Gateway

The gateway is the central radio unit of the system. Via the gateway, all radio components for the control of the radiators (radiator drive), the underfloor heating (underfloor heating control) as well as the room temperature measurement (room sensor) are connected to the control box. The gateway itself is also integrated in the home network via WLAN or cable.

Underfloor heating control

The radio - underfloor heating control controls up to 8 rooms/zones. It communicates wirelessly with the gateway and is equipped with an integrated repeater for improved wireless coverage with other radio components.

Radiator drive

The radiator drive has an integrated room temperature sensor for controlling an individual radiator and communicates wirelessly with the gateway.

Room sensor

The room sensor measures the actual temperature in the rooms with underfloor heating. It communicates with the gateway via radio and is required for all rooms with underfloor heating.

Repeater

The repeater amplifies the radio signal between the radio components or opens up inaccessible ranges.

Installation kit

The installation kit is a tool required for operating the alpha home system via a laptop/PC. It consists of 1 x USB - LAN adapter, 1 x patch cable and 1 x transport bag.

WLAN stick

The WLAN stick is needed if the control box cannot be integrated into the home network via the network cable. Communication with the router then takes place via WLAN.

Adapter-Set 1

The adapter set 1 is required for Danfoss control valves.


alpha home - possible combinations

In modern buildings, radiators are often used in children's rooms or bedrooms and underfloor heating in living rooms. With alpha home, radiators and underfloor heating can be combined as desired and existing systems can be expanded. Perfectly matched to the heat pump, alpha home therefore always offers the most efficient solution for individually controlling individual room temperatures.


alpha home-System

Would you like to know how the alpha home system works and how you can benefit from it? Get all the important information here.

FAQs | Support

Here, you will find answers to the most frequently asked questions. Your question is not listed here or you require more information? Simply fill out the form.